Ford Ranger

Ford Ranger

Custom Sound System

Looking from the outside in no one would suspect the mammoth car audio install that lies inside. This ranger went all out with a big install in very limited space.

Starting with the front a set of Focal Utopia class 3-way components were custom fit into the doors with custom made A-pillars to house the mid woofers. The crossover block (which is huge) for these was installed under the drivers seat.

Rear speakers were met with similar treatment receiving a set of Utopia class 2-way components.

Driving these impressive speakers is up to an Audison Thesis 4 channel amplifier mounted on a custom amp rack on the back wall accompanied by another Thesis amplifier for the sub woofer. Controlling these amplifiers is the popular Audison Bit 1 DSP with the DRC mounted in a custom holder near the gear shifter.

The subwoofers are held in custom made enclosures occupying the space beside the amplifier rack holding 1x JL Audio 13″ slim line sub woofer each. The entire car was coated in Dynamat sound treatment and the cables laid down were from Connection.

Alpine was the head unit of choice on this build fitting in a 7″ multi media navigation unit. This audio install is testament to not judging a book by its cover as you never know what gem lies beneath the exterior.

Products used:

  • Focal Utopia Kit 7 3-Way Components
  • Focal Utopia Kit 6 2-Way Components
  • JL Audio 13TW5V2 13″ Subwoofers
  • Audison Bit 1 DSP
  • Audison Thesis TH Quattro 4 Channel Amplifier
  • Audison Thesis TH Uno Mono Block Amplifier
  • Connection Cabling
  • Dynamat Sound Deadening

Custom Sound System

Looking from the outside in no one would suspect the mammoth car audio install that lies inside. This ranger went all out with a big install in very limited space.

Starting with the front a set of Focal Utopia class 3-way components were custom fit into the doors with custom made A-pillars to house the mid woofers. The crossover block (which is huge) for these was installed under the drivers seat.

Rear speakers were met with similar treatment receiving a set of Utopia class 2-way components.

Driving these impressive speakers is up to an Audison Thesis 4 channel amplifier mounted on a custom amp rack on the back wall accompanied by another Thesis amplifier for the sub woofer. Controlling these amplifiers is the popular Audison Bit 1 DSP with the DRC mounted in a custom holder near the gear shifter.

The subwoofers are held in custom made enclosures occupying the space beside the amplifier rack holding 1x JL Audio 13″ slim line sub woofer each. The entire car was coated in Dynamat sound treatment and the cables laid down were from Connection.

Alpine was the head unit of choice on this build fitting in a 7″ multi media navigation unit. This audio install is testament to not judging a book by its cover as you never know what gem lies beneath the exterior.

Products used:

  • Focal Utopia Kit 7 3-Way Components
  • Focal Utopia Kit 6 2-Way Components
  • JL Audio 13TW5V2 13″ Subwoofers
  • Audison Bit 1 DSP
  • Audison Thesis TH Quattro 4 Channel Amplifier
  • Audison Thesis TH Uno Mono Block Amplifier
  • Connection Cabling
  • Dynamat Sound Deadening