Range Rover Sport

Range Rover Sport

Custom Car System

An Alpine 9″ DVD and Satellite Navigation with reversing camera head unit was installed with a custom made and painted fascia panel. The factory hazard lights and other miscellaneous buttons were relocated into the top glove box.

Processing the audio is a Audsion bit 1 allowing for fine adjustments whilst also improving the source signal. The processors DRC was mounted in the centre console which hides away under a factory flip panel. Dynamat sound dampening was added to the car on all four doors inner and outer skin as well as the boot. For speakers we chose Rockford Fosgate T-series components with a matching set installed into the rear doors. Two Rockford Fosgate 10’’ T-series sub woofers were installed into a custom mad MDF/Fibreglass hybrid box wrapped in black factory matching carpet.

Powering the system are three T-series amplifiers. One amplifier is running the sub woofers whilst two are controlling the speakers as the front set are run actively in this build. The amplifiers are mounted in a compartment located under the factory rear floor whilst a Rockford Fosgate 10 Farad Capacitor and power distribution box are located under the rear seats. This Range Rover’s audio performance was beyond what we expected and was exactly what the customer was looking for.

Products used:

  • Rockford Fosgate T4 Components
  • Rockford Fosgate T1 10″ Subwoofers
  • Rockford Fosgate T800/4 Amplifiers
  • Rockford Fosgate T1500/1BD Mono Block Amplifier
  • Rockford Fosgate 10 Farad Digital Capacitor
  • Rockford Fosgate Cabling Throughout
  • Audison BIT 1 DSP
  • Alpine X901 9″ Head Unit
  • Dynamat Sound Deadening

Custom Car System

An Alpine 9″ DVD and Satellite Navigation with reversing camera head unit was installed with a custom made and painted fascia panel. The factory hazard lights and other miscellaneous buttons were relocated into the top glove box.

Processing the audio is a Audsion bit 1 allowing for fine adjustments whilst also improving the source signal. The processors DRC was mounted in the centre console which hides away under a factory flip panel. Dynamat sound dampening was added to the car on all four doors inner and outer skin as well as the boot. For speakers we chose Rockford Fosgate T-series components with a matching set installed into the rear doors. Two Rockford Fosgate 10’’ T-series sub woofers were installed into a custom mad MDF/Fibreglass hybrid box wrapped in black factory matching carpet.

Powering the system are three T-series amplifiers. One amplifier is running the sub woofers whilst two are controlling the speakers as the front set are run actively in this build. The amplifiers are mounted in a compartment located under the factory rear floor whilst a Rockford Fosgate 10 Farad Capacitor and power distribution box are located under the rear seats. This Range Rover’s audio performance was beyond what we expected and was exactly what the customer was looking for.

Products used:

  • Rockford Fosgate T4 Components
  • Rockford Fosgate T1 10″ Subwoofers
  • Rockford Fosgate T800/4 Amplifiers
  • Rockford Fosgate T1500/1BD Mono Block Amplifier
  • Rockford Fosgate 10 Farad Digital Capacitor
  • Rockford Fosgate Cabling Throughout
  • Audison BIT 1 DSP
  • Alpine X901 9″ Head Unit
  • Dynamat Sound Deadening