Stop Vibrating Sheet Metal and Road Noise with Dynamat!
High vehicle noise levels cause driver fatigue and irritation, and will affect the way music sounds out of speakers. When the vehicle is noisy, music and conversations can sound unclear and distorted. Dynamat Xtreme is the highest efficiency sound damping material available and the most effective product for stopping noise and vibration in your automobile. With Dynamat Xtreme installed, road noise becomes silent energy. The effect this has on your sound system is phenomenal. Your music sounds clearer, your bass is louder and tighter, and your stereo can sound twice as loud. Add a Dynamat brand thermoacoustic liner- such as Dynaliner or DynaPad to fight heat and low frequency hums from engines and exhaust systems – and you’ve got a ride with even more noise-blocking ability, and better sound.
Dynamat Xtreme is a thin, super sticky butyl rubber bonded to an aluminum alloy skin. It is formulated with Vector™ Chemistry, and makes Dynamat Xtreme the most effective sound control material available. Dynamat Xtreme is very simple to cut and install. The butyl rubber and heavy aluminum will stretch and contour better than any other product on the market without tearing. It will conform easily to all interior surfaces, and the sticky butyl rubber will adhere to a surface and stay in place without any special surface prep, and without leaving any odor or dripping material. Install it in your vehicle, and experience the Dynamat Difference.
10465 – Xtreme Mega Pack – Peel & Stick
– 9 Pieces – 609mm x 1219mm 6.68 sqM
– For Installers and enthusiasts
– To Cover larger areas
Dynamat is a patented, lightweight elastomeric butyl and aluminum constrained-layer vibration damper. Dynamat conforms and fuses easily to sheet metal and other hard substrates. Material performance is optimized for temperature ranges between 14°F and 140°F (- 10°C to +60°C). Material can withstand temperature extremes between -65°F and +300°F (-54°C to +149°C) and is highly resistant to aging.
Discover the Dynamat Difference:
You want to consider several things when you compare Dynamat to other materials. Dynamat exceeds other materials because of proprietary VECTOR™ Chemistry and damps better at an extended higher temperature range. Dynamat does not absorb moisture and is not affected by oil. Its elastometric “space age” synthetic rubber will stay intact under foot and sticks to overhead, vertical and oily surfaces. It is much easier to do a better job with Dynamat’s larger sheets of 3, 4 and 8 square feet while imitators can have less than 2 square feet. Dynamat is and has been made in the USA for over 20 years. We guarantee it!
Dynamat can be die cut to shape and placed onto the body surface directly on painted panels or after the sheet metal is cleaned before painting (typically at the sealer application operation). Dynamat is used to treat metal panels, partitions, ducts, doors, bins, panels, and so forth in automobiles, railroad cars, buses, and ships. It is also used for ventilation ducts, relay cabinets, steel furniture, home appliances, sink units, computer equipment, machine tools and many other objects that suffer from vibration-produced noise.
Use scissors, knife or die to cut Dynamat to the desired size and shape before removing the release liner. Next, remove dust, grease, moisture, and other foreign matter from the application surface. Peel off the release liner. The simplest application technique is to bend the mat slightly and attach it along its shortest edge. Press the mat firmly into place, using a Dynamat Roller for larger pieces. The roller reduces the risk of leaving air pockets, which reduce Dynamat’s sound damping capacity. Finish by covering all seams and wiring with DynaTape to ensure a professional look and finish. The temperature of the mat and application surface should not be below room temperature during fitting. Heating the material is not necessary.